TT3 Series

Products USB Interface Series

Products Center

Product Category

PFH Series PZ Series PS Series PF Series

TT3 Series TT2 Series US3 Series

MS7 Series TS-TFH Series

TU Series

Jump to

TT3 Series TT2 Series US3 Series

TT3 Series

Model:

Number of Port:

select

Product Feature

Built with industrial-grade FPGA chip, supports simultaneous duplication of 64 USB drives without speed drop or lag.

Multi-dimensional screening tests: Supports H2 and UReach H5 tests, plus capacity, speed, and bad block screening.

Production record tools for saving and exporting logs.

Contact Now

64-Port USB Drive Quality Tester

By incorporating the widely-used H2 and UReach H5, the TT3-64UB can check for bad sectors, measure actual read and write speeds, and offer various other functions to meet customer needs. The use of FPGA chips ensures strict control over USB quality, maintaining high inspection efficiency even with a large number of testing devices.

Independent stand-alone system:

This system operates independently,

eliminating the risk of computer viruses and allowing for quick power on/off.
Multiple inspection area settings:

Users can define the minimum read/write

speed for USB drives based on capacity percentage or actual capacity when using

H2/UReach H5.
Detachable module:

Designed for easy maintenance, allowing quick disassembly

of the panel and independent replacement of the interface, significantly

reducing costs.

Product Features of TT3 Series

High-Efficiency Testing・Exportable Reports・Ideal for Mass Production Quality Control

TT3-64UB USB 3.0 quality testing device supports multi-port simultaneous inspection. With a clean and efficient design, it is ideal for pre-shipment testing of large batches of USB flash drives. It offers complete performance verification of USB 3.0 devices and is suitable for USB 3.0 flash drives, customized storage modules, and similar products.

Supports two detection modes: H2 and UReach H5

• ✅ Supports full H2 and UReach H5 testing

• ✅ Adds USB 3.0 signal integrity verification

• ✅ Supports high-speed device performance and stability analysis

• ✅ Multi-port, independent parallel testing channels

• ✅ Saves and exports test logs for traceable management

• ✅ No PC required, simple plug-and-play operation

Event Log report (LOG) Reports Enable Easy Judgment of Product Yield

Intuitive user interface with support for exporting LOG production management records, enabling easy production line traceability and quality control.

How to Quickly Determine a USB 3.0 Signal?

Provides complete verification of true USB 3.0 performance. Ideal for testing USB 3.0 flash drives and custom storage modules before shipment. Helps establish consistent inspection standards for large-volume orders and filters out defective products caused by poor soldering on USB 3.0 connectors.

Selection Parameter Table for TT3 Series

Compare TT3 Series Modles

Enter Your Requirements to Obtain a Capacity Trial Calculation for JMEGA Products.

TT3 Series

TT2 Series

US3 Series

Product Transmission Speed

GB / Min

Select Product Ports

select 1

select 2

select 3

select 4

select 5

Please Enter the Amount of Information (GB)

This field is required!

Please Enter Your Working Hours (Hours)

This field is required!

EStart the Trial Calculation

TT3 Series

TT2 Series

US3 Series

Product Transmission Speed

GB / Min

Select Product Ports

select 1

select 2

select 3

select 4

select 5

Please Enter the Amount of Information (GB)

This field is required!

Please Enter Your Working Hours (Hours)

This field is required!

EStart the Trial Calculation

Calculation Result

Product Model Number

Estimated Production Capacity

Product Model Number

Estimated Production Capacity